This is the SC ferrule(φ2.5) and the split sleeve accepting the SC ferrule.
We provide not only the standard SC ferrule having a hole diameter of 125μm but also ones having a hole diameter of 80μm.
The SC ferrule is used for the FC connector which has a screwing lock mechanism and the SC connector which has a push-pull locking system.

The PANDA fiber can be attached with the FC connector and the SC connector.

We developed the SC ferrules in cooperation with NTT.

This is the MU ferrule(φ1.25) and the split sleeve accepting the MU ferrule.
We provide not only the standard MU ferrule having a hole diameter of 125μm but also ones having a hole diameter of 80μm.
This MU ferrule is used for MU connector.
The MU connector was developed by NTT and is very small. Therefore the outside diameter of it is as small as 1.25mm.

We are also able to provide nonstandard ferrules and split sleeves.
If you wish to use the particular fiber and the ferrule having exceptional length for the experiment and so on, please contact us.
And please feel free to contact us for the outside diameter, inside diameter and length of ferrules and split sleeves.